t-tops are leaking!!!

Nissan Forum Nissan Classifieds Gallery Member List Calendars Search Sponsors
Nissan Lineup News Forum FAQ Contact NF Nissan Recalls TSBs Timeslips Register Login

t-tops are leaking!!!

Printable Version

Nissan Forum >> Nissan Cars >> Nissan 300zx >> t-tops are leaking!!!

Page: [1]

Message

<< Older Topic Newer Topic >>

t-tops are leaking!!! - 5/4/2008 5:54:12 PM

knobelkyle

Posts: 5
Joined: 5/4/2008
Status: offline

my t-tops on my 1990 300zx are leaking! what can i do to stop it?!

Post #: 1

RE: t-tops are leaking!!! - 5/7/2008 12:07:26 PM

nismo89Z

Posts: 41
Joined: 5/29/2006
Status: offline

check the weatherstrip on the t-tops replace it if it's worn. thats usually the biggest problem with leaky t-tops...clean the surface before replacing it though that way u have an easier time applying the adheasive to the strip.

(in reply to knobelkyle)

Post #: 2

RE: t-tops are leaking!!! - 5/7/2008 8:24:06 PM

knobelkyle

Posts: 5
Joined: 5/4/2008
Status: offline

where do i get the stripping?

(in reply to nismo89Z)

Post #: 3

RE: t-tops are leaking!!! - 5/8/2008 9:10:57 AM

nismo89Z

Posts: 41
Joined: 5/29/2006
Status: offline

you can buy it at any autoparts store if they don't have it then you would have to go to the dealer.....its worth it though i had the same problem and all my cd's got messed up because of it. and if it gets into your carpet then its gonna be stinky for a while

(in reply to knobelkyle)

Post #: 4

RE: t-tops are leaking!!! - 5/9/2008 8:12:24 PM

knobelkyle

Posts: 5
Joined: 5/4/2008
Status: offline

awesome thanks! you wouldnt happen to know how to turn down the idle speed on a 1990 300zx? i tried the screws on the throtle body but all that did was made my pedal sticky... any words of wisedom?

(in reply to nismo89Z)

Post #: 5

RE: t-tops are leaking!!! - 5/24/2008 6:10:55 PM

nismo89Z

Posts: 41
Joined: 5/29/2006
Status: offline

i know on my models it was on the idle air control valve. i'm not sure where its on the z32 models but if u can locate it that would be your best bet...i don't remember if u screw out or in but give it a try and i'm sure you'll get the result you want.

(in reply to knobelkyle)

Post #: 6