1995 ka24de

Nissan Forum Nissan Classifieds Gallery Member List Calendars Search Sponsors
Nissan Lineup News Forum FAQ Contact NF Nissan Recalls TSBs Timeslips Register Login

1995 ka24de

Printable Version

Nissan Forums >> General Nissan Forums >> General Nissan Tech >> 1995 ka24de

Page: [1]

Message

<< Older Topic Newer Topic >>

1995 ka24de - 4/9/2008 7:34:37 PM

ka24de

Posts: 1
Joined: 4/9/2008
Status: offline

hello im new to this site but i have a question .
i have a 1995 nissan altima gxe with the ka24de .
rebuilt head and timing chain overhaul kit .
i put a cold air intake on and i drilled holes for all of
my stock vacume hoses and sensors into the pipe so it runs and drives
but my question is when i start the car in the morning its starts right up but it dies .
i repeat it three times till it will stay running but idle is aradic and low at 400rpms.
how do i get it to run like it was with the stock intake and still have my gas millage i was getting ?

thanks any help would b great ...

Post #: 1

RE: 1995 ka24de - 4/12/2008 10:31:15 AM

Burnnout

Posts: 664
Joined: 11/24/2006
Status: offline

Sounds like you don't have the MAF connected to the new intake correctly. If you bought an intake made for the altima you shouldn't have had to drill holes.

(in reply to ka24de)

Post #: 2

RE: 1995 ka24de - 11/29/2008 1:22:02 AM

bugass

Posts: 14
Joined: 3/20/2008
Status: offline

i had a 85 300zx and when it was cold wouldnt stay running during warmup unless i was giving it gas or had the heater running
you could try that but more than likely its ur maf

(in reply to Burnnout)

Post #: 3