200sx exhaust switch? 95-97

[anfnfalfan]

I need to replace my exhaust on my 95 nissan 200sx, 1.6l and i stumbled accross a 97 200sx with good exhaust and pulled it off the car. Was going to put it on the car today, but it is slightly different. The main difference is the 95 has the second o2 sensor on the catylic converter, and has three wires. The 97 has the second o2 sensor about 2 feet before the catylic converter, and has 4 wires. Can i still make this work? Any help would be greatly appreciated......been pretty frustrated since i ripped it all apart, and now its all in pieces....

[04goat]

yes it will work! all you will have to do is take the 02 sensors out of the back holes and put plugs into them. then put your current 02 sensors back into the front holes and your done. that is a easy fix.

[full house]

yes it will work! all you will have to do is take the 02 sensors out of the back holes and put plugs into them. then put your current 02 sensors back into the front holes and your done. that is a easy fix.T

great! I tried this and it work... I try that all the time and tell it to my friends and it work also.

[anfnfalfan]

Are you saying take the o2 sensor from the 95 nissan exhaust (behind catylic converter) that i am taking off the vehicle and run it up to where the o2 sensor is on the 97 exhaust (before catylic converter) that im putting on the 95 nissan? They are two different 02 sensors, im sure they will both mount up though. Wont that read differently on the ECU and possibly throw a code since im sure the emissions are different?! Thats what i was going to do originally, but didnt think it would work properly.